EM4200 Card

EM4200 is a CMOS integrated circuit intended for use in electronic Read Only RF transponders. It is designed to replace directly the EM Microelectronic-Marin Read Only ICs EM4100/4102 and EM4005/4105.
Comparing to EM4100/4102 and EM4005/4105, the chip provides higher reading range performances and presents on its coil terminals bigger resonant capacitor (210pF and 250pF selectable by mask option).
The 128 bit unique code is stored in laser programmed ROM. Several options are available to use 64, 96 or 128 bits of ROM.
The circuit is powered by an external coil placed in an electromagnetic field and gets its master clock from the same field. By turning on and off the modulation current, the chip will send back the unique code contained in afactory pre-programmed laser ROM.

Key Features
-Compatible with EM4100 and EM4102
-Full compatible EM4005 and EM4105 communication protocols
-128 bit UID ROM (64 and 96 bit option available)
-Frequency: 100khz to 150khz

-Several options of data rate and data encoding
* Manchester 32 and 64 RF clocks per bit
* Biphase 32 and 64 RF clocks per bit
* PSK 16 RF clocks per bit ( subcarrier RF/2)
* FSK2 50RF clocks per bit

- Several resonant capacitor integrated on chip (0pF, 75pF or 250pF mask option)
-On-chip rectifier and voltage limiter
-No battery supply support
- -40°C to +85°C temperature range
-Very low power consumption and High performances

Applications
* Access contro
* Logistics automation
* Animal identification according to ISO11785 (FDX-B)
* Waste management standard(BDE)
* Anti-counterfeiting
* Industrial transponder

Descriptions
-Dimension: 85.60 x 53.98mm (credit card size, CR80)
-Thickness : 0.92+-0.02mm
-Card surface: Matt/Glossy finish
-Material : PVC, PET, ABS, PET-G, Paper
-Housing: Laminated

Card Craft
-Punching hole
-Silver/gold metallic
-Barcode
-Magnetic stripe: 2750oe hico, 4000oe hico, loco
-Offset/silk-screen printing
-UV logo
-Numbering: thermal number, UV number, jet dot number, laser number
-Signature panel
-encoding

The chip completely compatible with EM4200 is TK4100. The performance of TK4100 is the same as EM4200 chip. As the price of EM4200 is relatively higher, so the TK4100 is used in many projects instead of EM4200 chip.

* Any question or inquiry about RFID card and RFID related products, please send email to info@oprfid.com, we will reply you within 24 hours, thanks

Applications of RFID Cards are distributed in identification, access control, supply chain, inventory tracking, vehicle fees, security, producing control, and asset management, especially on pets. Passive RFID Card can operate in the low frequency (LF), high frequency (HF) and ultra-high frequency (UHF) radio bands. These three frequencies are ok for us. RFID Cards have adequate security. Because RFID carries the electronic information, and the content of data vias a password to protect, so that its contents can not easily be forged and altered. We have invested in the latest printing techniques for RFID Cards to meet our customers' expectations of quality, flexibility and speed of service, and offer the full range of in-house print solutions from design to mailing and fulfillment.