Ultra Thin Sheet Inlay

OPrfid Technology CO., LTD offers a broad range of LF(125KHz) and HF(13.56MHz) finished products designed for the most demanding applications.
LF inlays complying with ISO 18000-2 standard, chiefly devoted to vehicles management system, safety management system, and hotel central locking system applications.
HF inlays complying with ISO 14443 A and B standards, chiefly devoted to transportation ticketing, access control, and identification applications.
HF inlays complying with the ISO 15693 standard, specially adapted to asset traceability applications.
To meet the market demand for ultra-thin card, Oprfid.com provides orresponding inlays with advanced etching antenna, as well as flip-chip bonding, which makes you be able to produce thin cards with the thickness of less than 0.50mm!

ultra thin sheet inlay

Product name: RFID Inlay
Material: PVC or PET
Size: 54*85.5*0.86mm
Frequency: 13.56MHz & 125KHz
Communication Protocol: ISO 14443A
Work temperature: -15°C ~ +55°C
Packaging technology: Ultrasonic automatic winding and Automatic Welding
Surface treatment technology: Glossy or matte
Surface optional design: Four-color offset printing, magnetic stripe, signature strips, marking, laser code, Convex code, Punch, Bronzing, hot silver, plus security, embossed oil, Gold-plated at the end, Silvering the end of
Main used in: access control, tickets, membership, public transportation, supermarket, e-payment etc.
Spare number:1.0‰
Packing: 200pcs/box, 2000pcs/carton; carton size: 50*24*15cm

Pre Product

Large Format RFID Inlay

Next Product

Dual Frequency RFID Inlay

* Any question or inquiry about RFID card and RFID related products, please send email to info@oprfid.com, we will reply you within 24 hours, thanks

RFID inlays are composed of an IC (Integrated Circuit, Chip) and a Dipole antenna. To attach the antenna to the IC we commonly use a strap. RFID inlays can be either "wet" or "dry" Wet inlays are inlays that have an adhesive backing with a clear or colored topsurface of PVC, PET or paper, the PVC or PET wet inlays are commonly used to make "RFID Labels" where the inlay is placed on the back of the label with the adhesive side away from the label side so that the label has continuous adhesive.PLacement of the wet inlay on the label is very specific to each RFID printer in order to be programmed correctly by the printer and also to minimize the risk of damaging the RFID inlay while in the printer.